E³ makes carbon-neutral working possible
Sustainability and Cost-Efficiency
E³ makes carbon-neutral working possible
Track quality is not a luxury, but an economic necessity.
Univ.-Prof. Dipl.-Ing. Dr. Peter Veit, TU Graz
The continuous working action reduces wear on the brakes, cardan shafts, and gearboxes. At the same time, it increases the machine’s output. The tamping unit frequency control makes it possible to penetrate old and hardened ballast beds more easily and extends the service life of the work units.
Lüder Gerdtz, Deutsche Gleisbau Union
[…] if a track geometry defect is present, the cumulative MGT “life” of the rail was approximately 30 % less than that of a rail defect with no track geometry defect.
LCC Zarembski, University of Delaware
Frequency control
The frequency control demonstrably leads to a lower load on the entire tamping unit, reduces wear, and increases efficiency.
0%
of fuel saved while increasing the output and lowering maintenance costs
Precise track geometry
P&T machines produce an extremely precise track geometry with an accuracy of < 1 mm.
00mm
accuracy
