Press release

Пресс-служба

Электронное сообщение отправить по адресу:

presse@plassertheurer.com

О фирме Плассер & Тойрер

Фирма Плассер & Тойрер уже 70 лет является лидером технологии на глобальном путевом рынке. Многочисленные разработки во многих различных областях обеспечивают эту позицию также и ближайшем будущем. Одновременно австрийское семейное предприятие занимается массивным расширением своих услуг в послепродажной сфере. Таким образом, оно станет первым контактным лицом для обеспечения техобслуживания путевых машин по всему их жизненному циклу.

  • Основание в 1953 году
  • Около 2200 сотрудников в Австрии
  • Около 6000 сотрудников в Австрии и 22 международных фирмах-партнерах
  • Ассортимент техники: машины и системы для строительства нового пути, реконструкции и текущего содержания пути и контактной сети
  • Поставка более 17800 комплексов в 110 стран
  • Доля экспорта - 93 %

Более подробная информация

Review of InnoTrans 2024: a visit from the future

“The future of mobility”. This was the motto of InnoTrans 2024, the international trade fair for transport technology. “Future track technology NOW” could be seen at Plasser & Theurer, both in Hall 26 and among the exhibits on the extensive tracks of the exhibition grounds in Berlin. There was a great deal of variety here and there, where the future was also visiting alongside countless trade visitors from all over the world. 

Plasser CatenaryCrafter

An impressive exhibit on display outdoors was the Plasser CatenaryCrafter 15.4 E³ for ÖBB. 56 machines of various designs have been ordered as initial call-off orders, and several are already in (trial) operation. Johannes Max-Theurer and ÖBB CEO Andreas Matthä presented the model at InnoTrans 2022, and exactly two years later the two presented the full-size vehicle together. The high-tech hybrid vehicle sets standards, running and working with electrical energy from the overhead contact line or from the traction batteries on board. The combustion engine only starts up in exceptional cases.

In addition to the electric hybrid drive, full equipment, ETCS train protection technology, and modern design, another feature is the modular design of the CatenaryCrafters and upcoming MultiCrafters: the basic structure as well as many components and controls are the same. Changing tasks and design lengths: the generation change modernizes infrastructure maintenance and speeds up installation work on the overhead contact line. All of this is as environmentally acceptable, ergonomic, and economical as possible – it’s no coincidence that this is the core message of the E³ brand.  

“I would like to emphasize in particular that ÖBB are a very good partner, always very constructive and working in a solution-oriented manner. In turn, ÖBB end up putting a vehicle on track that they can also work with for 30 years. And that's exactly what it's all about.” Johannes Max-Theurer

“We are operating one of the busiest networks in the European Union, currently with 166 million train kilometres. We are also an absolute top nation in terms of rail travel because Austrians travel the most by rail in the EU. This means we need highly available infrastructure. But that only works if you have the right tools, in this case a state-of-the-art maintenance vehicle.” Andreas Matthä, CEO of ÖBB Holding

Ten years of E³

The E³ trademark refers to all-electric and hybrid drives. Track maintenance machines with the abbreviation “E³” have been around for ten years, with the first one being presented in Salzburg in September 2015. E³ stands for “Economic, Ecologic, and Ergonomic”, i.e. the economic, ecological, and ergonomic benefits of these machines. They make it possible to green track maintenance. Thanks to its high efficiency, E³ technology reduces energy consumption, emissions, and operating costs – even for existing machines as part of retrofits. It is possible to drastically reduce their carbon footprint.

Deutsche Bahn’s memorandum of understanding

Following ÖBB’s example, Deutsche Bahn AG also intends to procure Plasser CatenaryCrafter 15.4 E³ vehicles. This was confirmed by Infrastructure Director Philipp Nagl at InnoTrans 2024. Increasing line utilization and train numbers necessitate replacement investments by DB InfraGO for its machine fleet. Shortly before InnoTrans, a memorandum of understanding was agreed on for the rental and subsequent purchase of 15 Plasser CatenaryCrafter E³ vehicles. Service partner Plasser ROBEL Services is also party to it.

Plasser CompactFlex with Plasser Datamatic: a debut

The new Plasser CompactFlex 4x4 tamping machine for plain-line track and turnouts made its debut in Berlin. It is part of a contract with the Taiwanese state railway company TRC for a total of 41 track maintenance machines featuring various working technologies. Digital tools are a part of this: the CompactFlex 4x4 on display is equipped with the SmartALC track geometry guiding computer and the DRP (Data Recording Processor) digital measuring recorder. With Plasser Datamatic, the machine is integrated into a cloud-based machine and fleet management system. Current machine statuses can be called up and long-term analyses carried out to increase availability, efficiency, and productivity.

Training on three square metres

3D simulation tools for training courses, also on the machine operating company's premises, make realistic travel and operation exercises possible. The compact solution with a computer and VR glasses only requires one desk and is available for several different machine types.

Plasser InfraSpector

The Plasser InfraSpector is a new solution for infrastructure inspection and surveying, particularly in regional and urban networks. It offers a high degree of flexibility, as seen in the Plasser Italiana service version mounted on a road-rail lorry. Alternatively, versions of the testing equipment in a container or based on the MultiCrafter are possible. Plasser InfraSpector follows the ISO IEC 17025 standard for quality and reliability. Diagnostics examine the track with track geometry, rail and structure gauge, subsoil, turnout, and overhead contact line.